| Paketname | setserial |
| Beschreibung | controls configuration of serial ports |
| Archiv/Repository | Offizielles Debian Archiv squeeze (main) |
| Version | 2.17-45.3 |
| Sektion | comm |
| Priorität | extra |
| Installierte Größe | 172 Byte |
| Hängt ab von | libc6 (>= 2.7), debconf (>= 0.5) | debconf-2.0 |
| Empfohlene Pakete | |
| Paketbetreuer | Jonas Genannt |
| Quelle | |
| Paketgröße | 52932 Byte |
| Prüfsumme MD5 | e766eb89abee7fcb44ad9019b0751754 |
| Prüfsumme SHA1 | 60b9d0703bc3e884284e45152cf07f80f008e9f0 |
| Prüfsumme SHA256 | 5ccd6c5c88cb7a63480ad140fe24012b5bb7547ece914e5d5d39c55404fabb4a |
| Link zum Herunterladen | setserial_2.17-45.3_i386.deb |
| Ausführliche Beschreibung | Set and/or report the configuration information associated with
a serial port. This information includes what I/O port and which IRQ
a particular serial port is using.
.
This version has a completely new approach to configuration, so if you
have a setup other than the standard ttyS0 and 1, you will have to get
your hands dirty.
.
By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4.
If you have other serial ports (such as an AST Fourport card), or
if you have mapped the IRQs differently (perhaps COM3 and 4 to other
IRQs to allow concurrent access with COM1 and 2) then you must have this
package.
|